Led under cabinet lighting kit 9 in., 18 in., and 24 in. (16 pages)
Summary of Contents for Commercial Electric PWRW28-4K-BZ
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED wallpack. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
Warranty (continued) LIMITATION OF LIABILITY In no event shall the manufacturer be liable for indirect, consequential, incidental or special damages, or lost profits. The manufacturer is not liable for any claims or damage arising out of or connected with the manufacture, sale, delivery, use, maintenance and repair or modification of the manufacturer products, or supply of any replacement parts that exceed the purchase price of the manufacturer products giving rise to a claim.
Page 4
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity #8-32 x 3/4 in. Phillips mounting bracket screw Wire nut Allen key PACKAGE CONTENTS Part Description Quantity Light fixture Conduit entry plug Mounting base screw (pre-installed) Mounting base Mounting plate bolt Leveling bubble...
Preparing for Installation □ The fixture can be mounted in the following two ways: Wall Mount □ Junction Box Mount: Use a junction box to mount the fixture. □ Surface Conduit Mount: The fixture can also be mounted directly on the wall surface using conduit entry. □...
Page 6
Installation (continued) Removing the mounting base plate □ Loosen the two mounting base plate bolts (E) using an allen key (CC) and remove the mounting plate (G) from the fixture. NOTE: Only unscrew the bolts (E) far enough to remove the mounting plate (G).
Page 7
Installation (continued) Hanging the mounting base to the mounting plate Junction Box Mount □ Push the three wires through the grommet (H) in the mounting base (D) and hang the fixture by attaching the mounting base (D) on the mounting plate (G). □...
Page 8
Installation (continued) Making the electrical connections inside the fixture □ Loosen the two mounting base screws (C) using a Phillips screwdriver to open the fixture. (Fig. 1) □ The fixture will open sideways and stay connected on the hinge.(Fig. 2) □...
Installation (continued) Securing the light fixture on the mounting base and caulking □ Close the fixture by tightening the two mounting base screws (C), using a Phillips screwdriver. □ Caulk around the mounting base (D) and surface with silicone sealant (not included). NOTICE: Failure to properly caulk around the surface and mounting base (D) could lead to water damage and is not covered under warranty.
Care and Cleaning □ Shut off the main power supply before cleaning the product. To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only. □ Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other chemicals on this light fixture. They could cause a premature deterioration of the finish and may void the warranty.
Page 11
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 9 a.m. - 5 p.m., EST, Monday-Friday 1-844-548-3776 HOMEDEPOT.COM Retain this manual for future use.