Advertisement
Preparing for Installation
□ The fixture can be mounted in the following two ways:
□ Junction Box Mount: Use a junction box to mount the
fixture.
□ Surface Conduit Mount: The fixture can also be
mounted directly on the wall surface using conduit entry.
□ Do not mount the fixture upside down.
□ When installing two fixtures on one switch, make sure the
switch is rated for at least a 1A inductive load.
NOTE: Do not wire to a dimming switch
NOTE: The mounting base (D) mounts to recessed mounted
standard junction boxes or to the surface directly. Junction
box must be at least 1-1/2 in. in depth for proper installation
for a recessed mount application.
Installation
1
Turning off the electricity
□ Verify the wall switch is in the Off position.
□ Turn off power at the circuit breaker that supplies power to
the outlet box you are working on.
□ For screw-in type fuses unscrew the fuse that supplies
power to the outlet box you are working on.
Wall Mount
1-1/2"
Round
5
Please contact 1-844-548-3776 for further assistance.
1-1/2"
Octagonal/Square
HOMEDEPOT.COM
Advertisement
