Led under cabinet lighting kit 9 in., 18 in., and 24 in. (16 pages)
Summary of Contents for Commercial Electric EMLEDRECT120277
Page 1
HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this emergency light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!
Table of Contents Safety Information .............2 Conduit Installation ...........6 Warranty..............2 Maintenance ..............7 Pre-Installation ............3 Battery Replacement ..........8 Junction Box Installation ..........5 Troubleshooting ............8 Safety Information IMPORTANT SAFEGUARDS. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. When using electrical equipment, basic safety precautions should WARNING: Disconnect power before servicing the always be followed including the following: product.
Pre-Installation PLANNING INSTALLATION Before beginning assembly, installation, or operation of the product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install, or operate the product.
Page 4
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Housing Backplate Test switch Locking tab Conduit flange...
Pre-Installation (continued) Removing the backplate from the housing □ Insert the flat screwdriver into the top of the locking tabs (D) and lightly pry the locking tabs (D) away from the housing (A) until they release from the housing (A). □...
Junction Box Installation (continued) Connecting the back-up Assembling the fixture battery □ □ Align the locking tabs and push the housing (A) Connect the PCB board connector to the directly onto the backplate (B). battery connector. □ Restore power to the fixture. The Test switch (C) NOTE: The battery will take 24 hours to fully charge.
Conduit Installation (continued) Connecting the back-up Assembling the fixture battery □ □ Align the locking tabs and push the housing (A) Connect the PCB board connector to the directly onto the backplate (B). battery connector. □ Restore power to the fixture. The Test switch (C) NOTE: The battery will take 24 hours to fully charge.
Allow the unit to charge for 24 hours illuminate. and then re-test. The battery isn’t Ensure the battery is connected. connected. If the above troubleshooting does not resolve the issue, contact a qualified electrician, or call Commercial Electric customer service at 1-877-527-0313.
Page 9
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the EMLEDRECT120277 and is the answer not in the manual?
Questions and answers