Summary of Contents for Commercial Electric EECLEDRG120277
Page 1
HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this emergency light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!
Table of Contents Safety Information .............2 Maintenance ..............7 Warranty..............2 Battery Replacement ..........8 Pre-Installation ............3 Troubleshooting ............8 Installation ..............5 Safety Information IMPORTANT SAFEGUARDS. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. When using electrical equipment, basic safety precautions should WARNING: Before beginning installation, turn off always be followed including the following: electricity by removing the fuse or turning off the circuit breaker.
Pre-Installation IMPORTANT: When constructing or remodeling and prior to installing, be sure to check with the local fire marshal or code enforcement office to ensure the correct color guidelines for your municipality are being followed. PLANNING INSTALLATION Before beginning assembly, installation, or operation of the product, make sure all parts are present. Compare parts with the package contents list.
Page 4
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Face plate Exit/emergency light frame Back plate Red lens Green lens JBOX mounting plate Canopy Top mount access cap Test button...
Installation Preparing the exit/emergency Changing the color (optional) light □ Remove the placard buttons (1) by twisting □ Remove the faceplate (A) using a flat screwdriver. them back and forth while pulling up. Remove □ Remove the appropriate arrow(s) (1) to indicate the preinstalled red lens.
Page 6
Installation (continued) Installing the exit/emergency light to the wall □ Punch out the appropriate mounting pattern and wire hole on the backplate (C) to fit the junction box. Feed the wires through the wire hole. □ Connect the wiring. Refer to “6 Connecting the wiring”.
Installation (continued) Connecting the wiring Completing the installation □ □ Make wire connections using the wire nuts (BB). Snap the faceplate(s) (A) onto the frame (B). □ □ For 120 V applications, use the black and white Restore power to the fixture. The Test button/ wires.
Allow the unit to charge for 24 hours illuminate. and then re-test. The battery isn’t Ensure the battery is connected. connected. If the above troubleshooting does not resolve the issue, contact a qualified electrician, or call Commercial Electric customer service at 1-877-527-0313.
Page 9
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the EECLEDRG120277 and is the answer not in the manual?
Questions and answers