Jetter AG
5.3 Installing the HMI
Installing the strain
relief
JVM-104-O08 User Manual
The illustration below shows how to install the device:
3
2
1
6
Fig. 6: Installation drawing
2 x self-locking nuts
1
RAM Mount ball
3
2 x countersunk screws for
5
mounting a RAM Mount ball
1.
Screw the desired RAM Mount attachments onto the mounting plate.
2.
Hold the JVM-104-O08 against the mounting plate from behind. The connec-
tors must be accessible through the openings in the mounting plate.
3.
Screw the mounting plate onto the JVM-104-O08.
Install strain reliefs for the connecting cables.
■
Ensure that there is sufficient clearance between the strain reliefs and the con-
nectors.
■
Connectors must not be obstructed, so that they can be removed in the event
of service.
5
4
4 x screw for fixing to the
2
JVM-104-O08
Mounting plate with opening for
4
connector
Alternate position of the RAM
6
Mount ball
Mechanical installation | 5
16 / 44