Installation
Installation without mounting aid frames
☞ Secure the hood body by tightening the screws on the
fastening bracket (screws M6 x12 mm with rounded
head PZ3).
Installation with mounting aid frames (optional)
☞ Secure the hood body by tightening the screws on the
fastening bracket (screws M6 x12 mm with rounded
head PZ3).
☞ Additionally secure the hood body to the mounting aid
frame with screws (metal screws PZ2 3.5 x 9.5 mm).
16
The position of the front panel in retracted condition must be
set to suit the depth of the kitchen cabinet.
☞ Pull the front panel out fully.
☞ Undo the screws for the stop position.
☞ Slide the front panel to the desired position.
☞ Tighten the screws again.
☞ Pull out the front panel.
☞ Secure the position of the hood body with an additional
screw connection (chipboard screws, countersunk head
PZ2 3.5 x 16 mm).
6005145_0 – 27.02.2020