Subtest; Run Under Subtest; Select Under Subtest; Options Under Subtest - Dell PowerEdge 4200 Installation And Troubleshooting Manual

are displayed: All, One, Clear All, Key-Help, and Quit
Menu.
To select all the test groups, press the <Enter> key when
All is highlighted in the Select menu.
To select an individual test group, highlight the test group
and press the <Spacebar> or highlight One and press
<Enter>. Press the up- or down-arrow key to change the
highlighted test group.
To reverse a test group selection, highlight the test group
and press the <Spacebar>. To clear all selections, select
Clear All.
The Key-Help category displays a list of key controls
available for the particular category you have chosen.
The Quit Menu category returns you to the previous
menu.

Subtest

Most of the test groups consist of several subtests. Use
the Subtest category to select individual subtests within
the test group(s).
When you select Subtest, many of the same categories as
those on the Main menu are displayed: Run, Select,
Options, Test Limits, About, Key-Help, and Quit Menu.
Each of these categories is explained in the following
subsections.

Run Under Subtest

Run in the Subtest menu displays five categories: One,
Selected, All, Key-Help, and Quit Menu. If you select
One, only the highlighted subtest is run. If you select
Selected, only the selected subtests are run. If you select
All, all of the subtests listed on the screen are run. (The
subtests are run in the same order as they are listed.)
The Key-Help category displays a list of key controls
available. The Quit Menu category returns you to the pre-
vious menu.

Select Under Subtest

Select in the Subtest menu allows you to select individual
subtests to tailor the testing process to your particular
needs. You can choose one or more subtests from the list.
When you choose Select, five categories are displayed:
All, One, Clear All, Key-Help, and Quit Menu.
To select all the subtests, press the <Enter> key when All
is highlighted in the Select menu. To select an individual
subtest, highlight the subtest and press the <Spacebar> or
highlight One and press <Enter>. Press the up- or down-
arrow key to highlight a subtest to be selected.
To reverse a subtest selection, highlight the subtest and
press the <Spacebar>. To clear all selections, select Clear
All.
The Key-Help category displays a list of key controls
available. The Quit Menu category returns you to the pre-
vious menu.

Options Under Subtest

The Options category in the Subtest menu functions the
same way as the Options category in the Main menu. For
information on this category, see "Options" found later in
this chapter.

Test Limits Under Subtest

The Test Limits category in the Subtest menu functions
the same way as the Test Limits category in the Main
menu. For information on this category, see "Test Limits"
found later in this chapter.

About Under Subtest

The About category in the Subtest menu displays infor-
mation about the highlighted subtest.

Key-Help Under Subtest

The Key-Help category in the Subtest menu displays a
list of key controls available.

Quit Menu Under Subtest

The Quit Menu category in the Subtest menu returns you
to the previous menu.
.
Running the System Diagnostics 5-5