Dell PowerEdge 800 Documentation Update

FILE LOCATION: S:\PERIPHS\Storage\CERC SATA 1.5-2s\TS\Linux_Install\A00\linux_install.fm
®
Installing Red Hat Enterprise Linux ES
(Version 3)
There is no support for the CERC SATA 1.5/2s running under the Linux operating system for the
Dell™ PowerEdge™ 800, SC1425 and 420SC systems. Before installing Linux, see the following
instructions appropriate to your system.
For the PowerEdge 800 and SC 1425 Systems
Before installing Linux on your system, ensure that the SATA Controller option under the
Integrated Devices menu in the System Setup program is not set to "RAID."
For the PowerEdge 420SC System
Before installing Linux on your system, ensure that the SATA Controller option under the
Integrated Devices menu in the System Setup program is set to RAID Off.
____________________
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.; Red Hat is a registered trademark
of Red Hat, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 1 9 / 0 4 – F O R P R O O F O N LY
November 2004