Refer to "DC Power Cables," found earlier in this
chapter, to determine the correct DC power cable
connector to use for the drive. Plug the DC power
cable connector into the 4-pin power input connector
on the back of the drive.
Ultra/Narrow
SCSI cable
Ultra/Narrow SCSI host
adapter connector (SCSI2 CD-ROM)
Figure 9-7. Cable Connections for a SCSI Device in an External Drive Bay
9-6
Dell PowerEdge 4200 Systems Installation and Troubleshooting Guide
Select the connector on the Ultra/Narrow SCSI cable
that most easily reaches the new SCSI device, and
press the interface cable connector firmly into the
drive's interface connector.
If you moved other drives at the beginning of this
step, snap them back into place.
SCSI CD-ROM drive
DC power cable
system board