Table of Contents
Advertisement
Available languages
Available languages
12. Lay the supplied drilling template on the
reverse side of the front panel in such
a way that the drilling template and the
front panel are flush at the top.
13. Transfer the drill holes from the drill tem-
plate to the front panel.
14. Drill the drill holes in the indicated posi-
tions using a (Ø 2 mm) drill bit.
15. Remove the protective films from the
other Velcro straps and stick the Velcro
straps to the front panel using the drilling
template.
Mounting the front panel
16. Attach the front panel to the door of the
dishwasher using the velcro straps (h),
hold the panel in place, and carefully
open the dishwasher door.
(k)
)
)
17. Remove the 4 screws from the inside
of the dishwasher door. Screw the front
panel in place at these positions using
the 4 enclosed screws (k).
The front panel has been successfully
mounted.
Adjusting the accessibility of
the dishwasher door
You can adjust how easy or difficult it is to
open the dishwasher door. This setting is
often required after the front panel has been
mounted. By turning both lower screws you
can change the spring force of the dishwasher
door.
In order to adjust the dishwasher door
– so that it is easier to access, turn the screws
in an anticlockwise direction.
– so that it is more difficult to access, turn the
screws in a clockwise direction.
Page EN-33
(k)
Advertisement
Chapters
Table of Contents
