Step 4 Create Array - HighPoint SSD7103 Installation Manual

SSD7103 Linux Debian10.4.0 Installation Guide

Step 4 Create Array

a. Attach four NVMe SSD to SSD7103 Controller;
Note
Make sure your USB flash partition format is FAT32.
b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information：
Enter the motherboard's Boot List and select start from UEFI USB flash:
c.
Command "Arraycreate.efi" to enter the Utility:
d.
Command "create RAID0 ".
e.
Create RAID0 array with all disks and with maximum capacity.
- 4 -