HighPoint SSD7103 Installation Manual page 12

SSD7103 Linux CentOS7.8 Installation Guide
Appendix A
Support command:
help/info/quit/exit/create/delete.
 Create Command
Syntax
Create Array Type (RAID0/RAID1/RAID10) Member Disk list
(1/1,1/2|*)Capacity(100|*)
Examples
<<< create RAID0
<<< create RAID0 *
<<< create RAID0 * *
<<< create RAID1 1/1, 1/3 10
capacity.
<<< create RAID10
<<< create RAID10 *
<<< create RAID10 * *
capacity.
 Delete Command
Syntax
delete {array ID}
Examples
<<< delete 1
Delete the first array from Logical device list.
<<< delete 2
Delete the second array from Logical device list.
 Info Command
Syntax
info
Display physical device list and logical list
 Exit Command
Syntax
Q/q/quit/exit
Quit the application
 Help Command
Syntax
H/h/help
This is help message.
Create RAID0 array with all disks and with maximum capacity.
Create RAID1 array with disk 1/1 and 1/3 and with 10GB
Create RAID10 array with all disks and with maximum
- 10 -