Preparation; Preparation 1: Setup; Viewing Environment - Sony ELF-SR2 Operating Instructions Manual

Preparation

Preparation

Preparation 1: Setup

For details on setting up the display, refer to the
supplied "Setup Guide".

Viewing Environment

Stereoscopic content such as 3DCG can
stereoscopically be viewed with the naked eye
on the display. Place the display on a desk and
enjoy viewing it in the following environment.
(Recommended)
Room illuminance: Approx. 100 to 1,000 lx and
100 lx and over for the surface of the face
Viewing distance: 50 cm to 70 cm (19
5
to 27 / inches)
8
Viewing angle (horizontal): ±25°
Viewing angle (vertical): –40°/+20°
For details, visit the following site.
https://www.sony.net/dev-srd
Front view
High-speed vision sensor
Top view
10
EN
3
/ inches
4
25º 25º
Side view
Notes
For details on room illuminance and other

information, see the following support site for
developers.
https://www.sony.net/dev-srd
View the display avoiding direct outside light

on the display.
Stereoscopic images may not be viewable due
to the light reflected on the display.
Do not place the display in an environment

where the high-speed vision sensor is facing a
light source.
 The display displays an optimized image by
detecting the viewer's face and recognizing the
eye-gaze of the viewer with the high-speed
vision sensor.
The display has been designed for users to

view images by placing it horizontally. If the
display is placed vertically, you cannot view
images in 3D.
When the viewing image is unstable, adjust the

viewing environment including the installation
position.
The high-speed vision sensor may be having
difficulty recognizing your eye-gaze.