Advertisement
OPTIONAL: EXTENDING THE COLUMNS
i. Insert the joining bars halfway into the
non-threaded end of item B1.
The two joining bars with grub screws go in
the front of the column and the 2 joining
bars with hex bolts go in the back.
IMPORTANT: Joining bars should be
inserted into the non-threaded end of
the 180cm column.
THREADS
Front of Column
ii. The two joining bars with grub
screws in the front of the column.
B7
x
Back of Column
The two joining bars with hex
bolts in the rear of the column.
B1
B1
B7
B1
Tighten hex bolts by hand.
Finish tightening using a
10mm spanner.
THREADED
7
Advertisement
