Download
Share
Print this page
B-Tech Better By Design System X BT8370 Installation Manual & Parts List
  1. Manuals
  2. Brands
  3. B-Tech Manuals
  4. Racks & Stands
  5. Better By Design System X BT8370
  6. Installation manual & parts list

B-Tech Better By Design System X BT8370 Installation Manual & Parts List

Universal videowall stand
Hide thumbs Also See for Better By Design System X BT8370:

Advertisement

Quick Links

Download this manual
BT8370
UNIVERSAL VIDEOWALL STAND
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Stand
PLEASE KEEP THIS FOR FUTURE REFERENCE
Installation Safety Notes....................................................................................................... . ..............2
Parts List.............................................................................................................................................4
Installation Notes................................................................................................................................6
Installation Instructions....................................................................................................... . ..............10
Optional Accessories........................................................................................................................23
B-Tech Contact Details........................................................................................................... . ..........24
INSTALLATION TOOLS REQUIRED
Crosshead
screwdriver
CONTENTS
10mm Spanner
B-TECH AV MOUNTS
www.btechavmounts.com
FEATURES
• Universal stand suitable for video wall screens
from 32" - 70" (81cm - 177cm)
• Max weight per screen: 50kg (110lbs)
• Designed for screens with VESA
mounting patterns
• Suitable for landscape or portrait screen mounting
• Collar compatible accessories such as shelves
can be fitted directly to the extrusion
• Integrated cable management
• All mounting hardware included
This assembly manual covers different installations.
Please note that some parts or procedures shown
may not be required for installation.
70"
50kg
177cm
Per Screen
Level
TM
& non-VESA
®
Knife

Advertisement

loading

Related Manuals for B-Tech Better By Design System X BT8370

Summary of Contents for B-Tech Better By Design System X BT8370

  • Page 1: Table Of Contents

    70" 50kg 177cm Per Screen CONTENTS Installation Safety Notes........................2 Parts List.............................4 Installation Notes..........................6 Installation Instructions........................10 Optional Accessories........................23 B-Tech Contact Details........................24 INSTALLATION TOOLS REQUIRED Crosshead 10mm Spanner screwdriver Level Knife B-TECH AV MOUNTS www.btechavmounts.com...

  • Page 4: Parts List

    BT8370 Due to the multiple installations available each option below PARTS LIST is dependent on the stand ordered. PLEASE KEEP THIS FOR FUTURE REFERENCE BASE BT8380-BASE BT8380-SHB ITEM PART NAME PER PACK BASE A8 A9 SUPPORT STEM* M8 x 90mm SCREW* M8 WASHER LEVELLING FOOT 6AF HEX KEY...
  • Page 5 SPACER BT8390-SP PART NAME ITEM PER PACK SPACER OPTIONAL RAIL EXTENSION KIT BT8390-EXT PART NAME ITEM TOTAL PER PACK JOINING BAR M6 x 8mm GRUB SCREW 3AF HEX KEY Screen Interface Arms INTERFACE KIT BT8390-VESA200F BT8390-VESA400F BT8390-VESA400MAF PART NAME ITEM PER PACK SCREEN INTERFACE ARM M6 x 8mm HEX SCREW...

  • Page 6: Installation Notes

    INSTALLATION NOTES FLOORSTAND STABILITY • Install stand on level ground • Minimum two person assembly When verifying the stability of the structure, consider the following external factors: 1. The strength of the floor. 2. Exposure to sudden and severe wind. 3.
  • Page 7 Installing columns with a height over 2.4M B-Tech recommends when extending the vertical columns over 2.4m to fix the first two columns (item B1) to the bases (item A1) and connect with a horizontal rail (item D1) and then build up, rather than building the product layed down on the floor (as shown in the assembly instructions).
  • Page 8 OPTIONAL: EXTENDING THE COLUMNS i. Insert the joining bars (item B7) halfway into the non-threaded end of the column (item B1). The two joining bars with grub screws (item B8) go in the front of the column and the 2 joining bars with hex bolts (item 9) go in the back.
  • Page 9 OPTIONAL: EXTENDING THE MOUNTING RAIL Combine Mounting Rails together using the BT8390-EXT i. On the intended front facing side of the mounting rail (item D1) insert 4 x joining bars (item F1) half-way into each slot, on the back side insert 1 x joining bar into the top slot and 1 x joining bar into the third slot (see fig.

  • Page 10: Installation Instructions

    INSTALLATION INSTRUCTIONS Attach Joining Plate to Column i. Connect together the M8 x 12mm (item C3) with M8 Sliding Nut (item C2) onto the joining plates (item C1). ii. Lay columns (items B1) on the floor and slide on the joining plates (item C1). IMPORTANT: Make sure the end with M8 threads are at the bottom of the columns.
  • Page 11 iii. Use the spacer (item F1) to set the distance between joining plates (items C1) on the column (item B1) according to the screen size. Once set, tighten the M8 x 12mm screws (item C3). ADJUSTMENT KNOB Leave at least a 5mm gap at the top of the column (item B1) for the end cap (item B2)
  • Page 12 Insert Sliding Nuts into Mounting Rails Lay mounting rails (item D1) on the floor and insert 4 x M8 sliding nuts (item D2). 2 in the second slot, 2 in the bottom slot. Insert 4 sliding nuts for each joining plate (item D1) to be attached to the rail.
  • Page 13 Attach Rails to Columns On the floor, lay the columns (item B1) face down onto the mounting rails (item D1). Through the joining plates (item D1), fasten the M8 x 12mm screws (item C3) into the M8 sliding nuts (item C2) attaching the mounting rails to the columns. To ensure straight assembly of columns (item B1), make sure the distance of the outer joining plates (item C1) to the end of the rails (item D1) are set the same on each rail.
  • Page 14 Assemble Bases to Columns Attach the bases ( item A1) to the columns ( item B1) using the support stems ( item A2), M8 x 90mm screws ( item A3) and washers ( item A4). Once bases are fixed, return stand to upright position. BT8380-BASE ASSEMBLY THREADED...
  • Page 15 Attaching Fixed and Tilt Interface Arms to the Screens Attach the interface arms (items G1) to the back of the screen using the screen fixing kit (items A-I). Ensure the arms are positioned the correct way round and the same holes are used on both arms.
  • Page 16 Attaching Micro-Adjustment Interface Arms to Screen (BT8390-VESA400MAF) Attach the interface arms (items G1) to the back of the screen using the screen fixing kit (items D-I). Ensure the arms are positioned the correct way round and the same holes are used on both arms. INTERFACE ARM LEFT SCREEN FIXING KIT INTERFACE ARM RIGHT...
  • Page 17 Attaching Pop-Out Interface Arms to Screens (BT8390-VESA400MAP) i. Attach the interface arms (items G1) to the back of the screen using the screen fixing kit (items D-I). Ensure the arms are positioned the correct way round and the same holes are used on both arms. SCREEN FIXING KIT INTERFACE ARM LEFT INTERFACE ARM RIGHT...
  • Page 18 Mount Screen to Rail i. Hook the first screen onto bottom left of the stand. A. FIXED & TILT ARMS B. BT8390-VESA400MAF ARMS C. BT8390-VESA400MAP ARMS ii. With a level, align the screen to the floor using the height A. FIXED & TILT ARMS adjustment screws / knobs on top of the interface arms.
  • Page 19 iii. Laterally adjust screen by hand. 3 x 3 Video wall installation example Lateral adjustment X axis Lateral Adjustment X axis NOTE: If mounting 3 or more screens across, mount the first screen centrally onto the bottom rail. Hook on the remaining screens After mounting each screen use the Y &...
  • Page 20 Using a level, align the screen to the floor using the Z axis adjustment knobs. Use the Y axis knobs to ensure the screen is perpendicular with the floor. HEIGHT ADJUSTMENT Z AXIS KNOB DEPTH ADJUSTMENT Y AXIS KNOB DEPTH ADJUSTMENT Y AXIS KNOB Lateral Adjustment...
  • Page 21 Secure Screens Once screens are aligned, tighten the safety screws on the bottom of interface arms (item G1) SAFETY SAFETY SCREW SCREW Servicing Screens (Pop-Out Arms only) Push centrally at the left and right of the screen Item G1 to pop-out the mount. The screen will rest in the popped-out 'open' position for servicing.
  • Page 22 Add End Caps and Cable Management Covers i. After screen cables are connected and routed down the back of the columns (item B1), partially clip on the cable management covers (item B3), this allows easy removal if more cables need adding. Once satisfied all cables are fitted, clip the covers on fully. ii.

  • Page 23: Optional Accessories

    Note: The Floor Fixing Kit can only be used when the levelling feet are attached to the base. BT8380-FBFK Cable Management Clip Mount a B-Tech shelf to a vertical column BT8390-CMC (item B1) using the M8 x 12mm screws (item B6) and M8 sliding nuts (item B5).

  • Page 24: B-Tech Contact Details

    B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd. B-Tech, Better By Design & System X are registered trademarks of B-Tech International Design & Manufacturing Ltd. All other brands and product names are trademarks of their respective owners.