Parts List.............................................................................................................................................4
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.
Page 3
Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno przekraczać podanego maksymalnego obciążenia. A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta.
BT7593 PARTS LIST WALL MOUNT ASSEMBLY Suitable for loads between 2kg to 6kg (4.4lbs to 13.2lbs)
Page 5
PART NAME WALL PLATE ARTICULATING ARM INTERFACE PLATE LOAD ADJUSTMENT SCREW COVER M8 NYLOC NUT LONG CABLE COVER SHORT CABLE COVER SPIRIT LEVEL 6mm ALLEN KEY 14mm SPANNER INTERFACE KIT M4 x 12mm SCREW FLAT SCREEN INTERFACE KIT (FOR ATTACHING MOUNT TO BACK OF FLAT SCREEN) PLEASE KEEP THIS FOR FUTURE REFERENCE...
INSTALLATION INSTRUCTIONS Fix the mount to a concrete / brick wall. WALL FIXINGS ARE NOT INCLUDED INSTALLATION BANDING WALL FIXINGS (NOT INCLUDED) DO NOT REMOVE THE BANDING UNTIL FLAT SCREEN IS ATTACHED...
Page 7
Fix the flat screen to the interface. FLAT SCREEN FLAT SCREEN Remove the banding, so the articulating arm is free to move. FLAT FLAT SCREEN SCREEN...
Page 8
Optional: Adjust arm resistance if necessary. FLAT SCREEN RESISTANCE FLAT SCREEN...
Page 9
Optional: Adjust tilt and swivel resistance if necessary. Remove part 5, adjust part 6 then re-attach part 5. i. Tilt adjustment. FLAT SCREEN ii. Swivel adjustment. RESISTANCE FLAT SCREEN...
WALL PLATE INTERFACE PLATE 100mm 10.5mm 3.9" 0.4" 100mm 4.5mm 3.9" 0.2" 75mm 3" 115mm 4.5" 130mm 5.1" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.