B-Tech System X BT8375 Installation Manual & Parts List page 10

2
Insert Sliding Nuts into Mounting Rails
Lay items D1 on the floor.
i. For each item C1 attachment, insert 4 x item C2 into item D1. Two in the 2nd slot, two in
the bottom slot.
ii. To attach item E1 to item D1, insert 4 x item E5 into the end of the rail. Two in each centre slot.
D1
E5
C2
C2
E5
ii. Angle Adjustment Connector
i. Column / Joining Plate
Assembly
Assembly
10