Table of Contents
Advertisement
4. Terminal Setup
To configure the system, connect a serial cable to a COM port on a
PC or notebook computer and to RJ45 type serial (console) port of the
Industrial Managed Switch. The console port of the Industrial Managed
Switch is DCE already, so that you can connect the console port
directly through PC without the need of null modem.
IGS Industrial Managed Switch
IP Address:
192.168.0.100
A terminal program is required to make the software connected to the
IGS-5225-8T2S2X and IGS-5225-8P2S2X Industrial Managed Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port
should be configured as:
z Baud: 115200
z Parity: None
z Data bits: 8
z Stop bits: 1
z Flow control: None
RJ45 to DB9 RS232 Cable
PC/Workstation
with
Terminal emulation software
Serial Port
7
Advertisement
Table of Contents
