Terminal Setup - Planet IGS-10020PT Quick Installation Manual

4. Terminal Setup

To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed PoE+ Switch. The console port of the Industrial Managed PoE+
Switch is DCE already, so that you can connect the console port directly
through PC without the need of null modem.
PC / Workstation
with
Terminal Emulation Software
Figure 4-1: Industrial Managed PoE+ Switch Console Connectivity
A terminal program is required to make the software connected to the
Industrial Managed PoE+ Switch. Windows' Hyper Terminal program may be
a good choice. The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be
configured as:
 Baud: 115200
 Parity: None
 Data Bits: 8
 Stop Bits: 1
 Flow Control: None
8
RS232 to RJ45 Cable
Serial Port
Managed Switch
RJ45
Console Port
Figure 4-2: COM Port Configuration