4.1 Logon to the Console
Once the terminal has been connected to the device, power on the
Industrial Managed Switch and the terminal will display "running testing
procedures".
Then, the following message asks to log in user name and password.
The factory default user name and password are shown as follows and
the login screen in Figure 5-1 appears
User Name: admin
Password: admin
The user can now enter commands to manage the Industrial Managed
Switch. For a detailed description of the commands, please refer to the
following chapters.
1. For security reason, please change and memorize
the new password after this first setup.
2. Only accept command in lowercase letter under
Note
console interface.
4.2 Configuring IP Address
The Industrial Managed Switch is shipped with default IP address
shown below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
8
Figure 4-1: Console Login Screen