Table of Contents
Advertisement
4. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed TSN Device.
TSN Industrial
Managed Device
Ring R.O. I/O
Console
115200,N,8,1
Reset
Console Port
115200,N,8,1
Figure 4-1: TSN Industrial Managed Device Console Connectivity
A terminal program is required to make the software connected to the
Industrial Managed TSN Device.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 115200
Parity: None
Data bits: 8
Stop bits: 1
Flow control: None
RJ45 to DB9 RS232 Cable
Figure 4-2: COM Port Configuration
PC/Workstation with
Terminal Emulation Software
Serial Port
7
Advertisement
Table of Contents
