Wall-Mounting A Featurephone - BT Versatility Installation And Maintenance Manual

BT Versatility
Installation and Maintenance Manual

Wall-mounting a Featurephone

The phone plinth is inverted on the base to wall mount the phone.
Locate, drill and plug the 2 screw locations as shown below. The holes should be deep enough to accept a
2.5 cm screw. Insert the two screws leaving sufficient space to clip the base over them. Locate the phone
and base over the screws.
Line cord rails
150 mm
Featurephone in Wall Mount position V16 and Console in Wall Mount position
29