Mounting The Backplane - BT Versatility Installation And Maintenance Manual

BT Versatility
Installation and maintenance Manual

Mounting the Backplane

Slide the backplane on from the right hand side. Ensure the connector is fully mated with the CCU.
Securing the backplane to the wall bracket
A mounting screw is used to securely locate the backplane on the wall bracket. This provides additional
rigidity to ensure the backplane and CCU connectors do not move.
Remove the fourth and fifth cover from the backplane.Locate the backplane on the bracket and connect it
to the CCU. The backplane must be fully connected to the CCU to correctly locate the mounting screw
hole. Insert the screw into the pillar on the bracket, which can be seen through the backplane mounting
screw hole.
Mounting screw hole
12