Table of Contents
Advertisement
Wall mounting
Before you wall-mount your Converse 2015
check that you are not drilling into any hidden
wiring
1
Use the template provided to mark the
positions for drilling the two holes.
2
Drill the two holes using an 8mm drill bit.
Wall
3
Insert the wall plugs if necessary then insert
the screws leaving about 8mm protruding
from the wall on which to hang the phone.
Connect the telephone line cords to the base
4
as shown in Setting Up, page 7.
Pull out and turn the handset catch 180° to
5
the wall mount position.
22
All manuals and user guides at all-guides.com
Converse 2015 ~ 4th Edition ~ 10th September '02 ~ 4517
Note
Wall plug
Screw
86mm
6
Attach the wall mount to the base by first
inserting the hook then pressing in the clips
until they lock into place.
If desk mounted, please see page 8.
7
Hang the holes on the back of the wall mount
over the screwheads and gently slide the
phone down to make sure it is securely in
place.
8
Hang the handset on the handset clip.
Advertisement
Table of Contents
