Table of Contents
Advertisement
Wall-mounting
Your Phone can be wall-mounted by
using the bracket provided.
You can use the bracket as a
template to mark where the
screws should go into the wall.
Before you wall-mount Your Phone,
check that:
the wall can support the weight of
•
the phone:
the position you choose leaves
•
sufficient space so that the phone
(which is larger than the bracket) is
clear of any obstruction on the wall,
such as a shelf or cupboard.
Drill two holes for the screws and
•
insert the wallplugs provided
(if required).
Drive the screws into the wall,
•
leaving about 4mm free on which
to mount the bracket.
Hook the bracket over the screw
•
heads.
Make sure that the power supply
•
and the telephone cables are
connected to the phone, then fit
the cables into the channels on
26
Edition 5 ~ 15.09.99
the underside of the phone.
Rotate the handset clip 180° so
•
that the handset will remain in
position once wall-mounted.
Clip the phone onto the bracket.
•
Advertisement
Table of Contents
