Page 1
This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom. Converse 2025...
Line1/Line 2 Recall Ringer volume Lets you select which line you want to use. Used to access some BT Select Switch between Hi, Lo and Off. Services and when using your phone When answering a call, press the line next with a switchboard.
Page 4
The bottom line shows the number of new calls RING : LINE 1 received (if any). 3:27 1/18 When using your Converse 2025 to make a call, the display shows the line you are using and the mode: handset, handsfree (speaker) or headset. 09 NEW CALLS 3:27 1/18 The call on Line 1 has been put on hold.
Please note that there is a detailed Index at the back of this guide, see page 27. At a glance Caller Display Using Caller Display Key features Calls list Introduction New calls indicator Unpacking your Converse 2025 General information For your records Guarantee Safety information Technical information Setting up Switchboard compatibility...
Lets you connect a PC, fax machine or internet device to Line 2. Use both lines connected to your Converse 2025 to hold a three-way conversation. Use the plinth to set your Converse 2025 at a comfortable angle on your...
Date of purchase: If anything is missing, please contact your place of purchase immediately. Place of purchase: Serial number Converse 2025 base (on the underside of the base unit): Purchase price: Handset For guarantee purposes, proof of purchase is required, so please keep your receipt.
Do not open the Converse 2025. This could expose you to high voltages or other risks. Contact the Helpline for all repairs. Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals.
Setting up Insert batteries as shown. Situate your Converse 2025 close enough to the phone sockets so that the line cord will reach. Your Converse 2025 can be wall-mounted. See ‘Wall-mounting’, on page 24. Close the cover and replace the screw.
Page 10
Place the handset on the hook. To wall mount, see page 24. If you have any difficulties setting up or using your Converse 2025, please call the BT Converse 2025 Helpline on Your Converse 2025 is now ready for use.
Using your Converse 2025 When the headset is ON handsfree is disabled. The Converse 2025's menu lets you select the way you want to use your phone. Press the button. The display shows SET CONTRAST. The At any time when in the settings menu current setting will flash.
Your current call is ended and Press the button or pick up you are connected to the new caller. the handset. Your Converse 2025 will pick a line for you. Dial the number. Choose a specific line yourself: Press the button.
It is recommended that only headsets that have on hold. acoustic shock protection are used with the The display shows HOLD and the Line Converse 2025. Compatible BT headsets are you are using and the Line indicator available from the following number: light will flash.
In standby or in handsfree, to adjust the speaker volume. When the handset is picked up, to Your Converse 2025 must have the headset adjust the handset volume function switched to . To switch on the When the headset is switched on, to headset setting, see Settings menu, page 10.
To end the conference call, but continue Press the button. The display talking to one of the callers, press the shows ENTER NAME. button you want to continue with, Use the keypad to enter the name you e.g. if your press Line 1, the caller on want.
Page 16
Press the Store button to confirm. To dial a number under a The display shows EDIT NAME. one-touch button Press the Delete or Down button to delete characters. Press the one-touch button (M1, M2 or M3) you want. Enter the new name. Pressing the Up button moves the cursor to the right.
You can store up to 32 of your most frequently Press the button. The display dialled numbers in the Converse 2025 directory. shows DIR. ITEM and the number of Stored numbers can be up to 28 digits long. entries stored in the directory.
Page 18
Press the button. The display Press the button. The display shows DIR. ITEM and the number of shows DIR. ITEM and the number of entries stored. entries stored. Press the buttons to Press the buttons to scroll through the entries until the one scroll through the entries until the one you want is displayed.
RPT to let you know that you to Caller Display for both lines. For more have been called by that number more than once. information on BT’s Select Services call BT free on The Calls list shares memory space with the Directory.
Page 20
New calls indicator To dial a number from the Calls list New calls are indicated by the New Call indicator flashing slowly. Press the Up or Down button to display then scroll through the Calls list. Press the Dial/Enter button to call the Dial/Enter To view the Calls list number displayed.
Page 21
With some incoming calls the telephone number of the caller is not available and therefore cannot be displayed. Press the button to display In this case your Converse 2025 provides you the Calls list. with some explanatory information. Press the button on the keypad to select the Calls list you want to delete.
Converse 2025 Helpline for assistance: Subject to the terms listed below, the guarantee , 9am-5.30pm, Monday to Friday. will provide for the repair of, or at BT’s or its In the unlikely event of a defect occurring, agent’s discretion the option to replace the please follow the Helpline’s instructions for...
European community. If you need further help with your Converse 2025, call the Converse 2025 Helpline on Are the telephone line cords plugged into the phone sockets? The ringer may be switched off. Check the ringer volume switch at the rear of the base.
Attach the wall mount to the base by first inserting the hook then pressing in the clips until they lock into place. Before you wall-mount your Converse 2025 check that: • you are not drilling into any hidden wiring Use the template provided to mark the positions for drilling the two holes.
Page 26
Cut out this page and place the template on the wall. The location of the screws is indicated by the centres of the crossed lines.
Index Delete nswer a call calls list 19-20 At a glance directory entry atteries one touch entry low warning Desk mounting installation/replacement Directory aller display copy to one-touch Call timer dial Calls delete answer edit conference store Display contrast – set handsfree Display symbols hold...
Page 29
ew calls indicator ne-touch memory copy to directory dial delete edit enter a pause store view ause eceive a call Redial Returning product Ringer volume afety information Screen display Secrecy/on hold Settings menu Setting up Switchboard compatibility echnical information Telephone socket Telephone line cord Time/date set npacking...
Page 30
44-46 Hung To Road Kwun Tong Kowloon Hong Kong 2 Line Corded Telephone Model No. : Converse 2025 I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s). Place : Hong Kong Date : 27th March 2002...