Indicator Light; Maintenance; Regular Maintenance; Winterizing - Acuva Arrow 5 Owner's Product Manual

Uv-led

Hide thumbs Also See for Arrow 5:

Table of Contents

Installation Guide Cont'd

Indicator Light

No Light: The device is idle or no power is connected.

Blue Light: The device is active and sterilizing water.

Green Light: The device is undergoing its self-cleaning protocol. This 30

second protocol occurs at start up as well as after every 12 hours of idle

time and can be safely interrupted to dispense water.

Note: If there is an issue the indicator light will turn red or yellow and the trouble shooting

table in section 5 should be consulted

The Arrow 5 is designed to give years of trouble-free use. Acuva products

use state-of-the-art UV-LEDs, meaning there are no mercury bulbs to replace.

However, there are some simple tasks that should be performed to ensure

continued operation.

1. Check monthly that none of the connectors are leaking.

2. Replace the in-line filter after winterization or as per the instructions on

the filter label.

Note: The small quartz windows inside the Arrow unit do not reach high temperatures to

encourage mineral build-up (scaling) as with UV lamp systems. As a result, no significant

scaling or loss of performance due to scaling over time is expected.

WARNING

Frozen pipes mean cracked pipes. Failure to properly winterize the

Acuva unit before it is exposed to freezing temperatures can lead to

damage and water leakage.

If the device is installed in a Recreational Vehicle (RV) ensure that the

RV is winterized as per its owner's manual.

Advanced UV-LED Water Purification |

acuvatech.com

Acuva's Arrow 5 UV-LED Water Purifier

O W N E R ' S P R O D U C T M A N U A L

Page 9

Table of Contents