Appendix A: Faucet Installation Instructions - Acuva Arrow 5 Owner's Product Manual

Warranty Cont'd
EXCLUSIONS
The limited warranty does not apply:
1. To normal wear and tear;
2. If the Product was not purchased from Acuva or its authorized retailers;
3. To damage caused by misuse, corrosion, moisture or liquids, proximity or
exposure to heat or external environment, accident, abuse, misuse,
neglect, improper installation or misapplication;
4. To physical damage to the Product;
5. To any software, whether or not supplied by Acuva.

Appendix A: Faucet Installation Instructions

1. Drill a 3/4" hole into the counter-top where the Smart Faucet will be
inserted.
2. Thread the faucet cable into the 3/4" hole and insert the faucet stem into
the hole.
3. Thread the faucet power cord through the plastic spacer under the
counter to ensure that the cord is not pinched against the counter when
the faucet is fastened into place, making sure that the spacer's O-ring
seal is facing up to seal against the counter.
4. Add the plastic threaded fastener to the faucet stem and tighten the
fastener against the spacer to secure the faucet into place. Make sure
that the faucet is positioned properly as required before tightening the
fastener.
5. To connect the ¼" water line to the faucet stem, slip the hex nut onto the
tube, followed by the plastic ferrule and plastic tube support. Press the
tube end and ferrule to the bottom of the faucet stem and tighten the hex
nut by hand, then tighten the nut with a wrench while being careful not to
over-tighten.
Advanced UV-LED Water Purification | acuvatech.com
Acuva's Arrow 5 UV-LED Water Purifier
O W N E R ' S P R O D U C T M A N U A L
Page 12