Related Manuals for Acuva Eco
Summary of Contents for Acuva Eco
-
Page 1: Installation Instructions
Installation Instructions Acuva Eco UV-LED Water Purifier Acuva Arrow UV-LED Water Purifier Acuva Technologies Inc. #162-2366 Main Mall, Vancouver BC V6T 1Z4 Canada www.acuvatech.com... - Page 2 Acuva Eco requires a flow restrictor (Item No. 11 in Figure 4). The Acuva Arrow has a built-in flow sensor and is activated with the flow of water while the Acuva Eco is manually activated with the Acuva Smart Faucet (Item No. 12 in Figure 4).
- Page 3 10. Cut a length of ¼” PEX tubing (Item no.10) that is long enough to connect the 3/8”OD-¼” Union to the faucet and proceed to the faucet installation. 11. For the Acuva Eco only, install the provided flow restrictor (Item no.11) inline with the ¼” PEX tubing.
-
Page 4: Final Installation Steps
At this point, the device is ready for regular use. 2. Maintenance The Acuva UV-LED Water Purification Systems are designed to give years of trouble free service. Using state-of-the-art long-life UV-LEDs, there are no mercury bulbs to replace and dispose annually. -
Page 5: Regular Maintenance
To prevent freezing, pump a non-toxic antifreeze into the water system. Open the point of use faucet connected to the Acuva device and continue to pump non-toxic antifreeze until you see the antifreeze coming out of the faucet. In the spring, remember to flush with fresh water to clear the antifreeze before drinking.