How Do I Evaluate My Blood Pressure; Using The Device For The First Time; Inserting The Batteries; Setting The Date And Time - Microlife BP W2 Slim Manual

Hide thumbs Also See for BP W2 Slim:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

How do I evaluate my blood pressure?

Table for classifying home blood pressure values in adults in accor-
dance with the international Guidelines (ESH, ESC, JSH). Data in
mmHg.
Range
Systolic
1
blood pressure
< 120
.
normal
2
blood pressure
120 - 129 74 - 79
.
optimum
3
blood pressure
130 - 134 80 - 84
.
elevated
4
blood pressure too
135 - 159 85 - 99
.
high
5
blood pressure
≥ 160
.
dangerously high
The higher value is the one that determines the evaluation. Example:
a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg
indicates «blood pressure too high».
4
Diastoli
Recommenda-
c
tion
< 74
Self-check
Self-check
Self-check
Seek medical
advice
≥ 100
Urgently seek
medical advice!

2. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The
battery compartment 3 is on the bottom of the device. Insert the
batteries (2 x 1.5 V, size AAA), thereby observing the indicated polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the
display. You can set the year by pressing the M-button 5. To
confirm and then set the month, press the time button 6.
2. Press the M-button to set the month. Press the time button to
confirm and then set the day.
3. Follow the instructions above to set the day, hour and minutes.
4. Once you have set the minutes and pressed the time button, the
date and time are set and the time is displayed.
5. If you want to change the date and time, press and hold the time
button down for approx. 3 seconds until the year number starts to
flash. Now you can enter the new values as described above.

Selecting the user

This device allows to store the results for 2 individual users.
Before each measurement, set the user switch 7 for the
intended user: user 1 or user 2.
User 1: slide the user switch 7 to the left to the user 1 icon.

Advertisement

Table of Contents
loading

Table of Contents