Attach the horizontal bracket
1. Use a wrench to remove the retainer nut from the back of the horizontal bracket.
(figure 5)
figure 5
Horizontal bracket
2. Loosen the two nuts at the back of the horizontal bracket.
3. Attach the horizontal bracket onto the mounting bracket at the end of the
extension pole.
4. Reattach the retainer nut that you removed in step 1 and use a wrench to tighten
the nut in place. (figure 6)
5. Tighten the two nuts that you loosened in step 2.
figure 6
Extension pole
Horizontal bracket
Instruction manual
Retainer nut
11
Wrench
Retainer nut
Wrench