Removing The Memory Modules; Prerequisites; Procedure - Dell Alienware Area-51 R5 Service Manual

Removing the memory modules

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the stability foot.
2. Remove the left and right side-panels. See

Procedure

1. Lay the chassis on the right side.
2. Locate the memory modules on the system board.
3. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot.
4. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
NOTE: Repeat step 2 to step 4 to remove any other memory modules installed in your computer.
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
After working
www.dell.com/
43