Steps
1. Insert the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
assembly.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch the
components on the memory module.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
31