Memory Modules; Removing The Memory Modules - Dell OptiPlex 5080 Small Form Factor Service Manual

Steps
1. Insert the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector.
2. Press the battery into the connector until it locks into place.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in after working inside your computer.

Memory modules

Removing the memory modules

Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5 in. hard drive assembly.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
32 Field service information