Replacing The Battery Case; Procedure; Post-Requisites - Dell Alienware Area-51 R5 Service Manual

Replacing the battery case

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Align the screw holes on the battery case with the screw holes on the chassis.
2. Replace the two screws (#6-32x5.2) that secure the battery case to the chassis.
3. Route the battery-case cable through the routing guides on the chassis.
4. Connect the battery-case cable to the I/O board.

Post-requisites

1. Replace the battery.
2. Replace the right side-panel. See
3. Replace the stability foot.
computer. After working inside your computer, follow the instructions in
"Replacing the side panels".
After working
www.dell.com/
27