Steps
1. Align the slots on the system-board shield with the ports on the computer.
2. Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base.
Next steps
1. Install the stand.
2. Install the
bottom
cover.
3. Install the
back
cover.
4. Follow the procedure in
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
5. Remove the
system-board
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
shield.
computer.
computer.
Removing and installing components
21