Memory Modules; Removing The Memory Modules - Dell W23C Service Manual

Steps
1. Align the slots on the system-board shield with the ports on the computer.
2. Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base.
Next steps
1. Install the stand.
2. Install the bottom cover.
3. Install the back cover.
4. Follow the procedure in

Memory modules

Removing the memory modules

Prerequisites
1. Follow the procedure in
2. Remove the back cover.
3. Remove the bottom cover.
4. Remove the stand.
5. Remove the system-board
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
22 Removing and installing components
After working inside your
Before working inside your
shield.
computer.
computer.