Memory Modules; Removing The Memory Modules - Dell OptiPlex 5080 Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector.
2. Insert the solid-state drive at a 45-degree angle into the slot on the system board.
3. Replace the screw (M2x3.5) to secure the M.2 2280 solid-state drive to the system board.
Next steps
1. Install the fan duct.
2. Install the side cover.
3. Follow the procedure in

Memory modules

Removing the memory modules

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the fan duct.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
30 Disassembly and reassembly
after working inside your
before working inside your
computer.
computer.