Removing The Wireless Card; Prerequisites; Procedure - Dell Alienware Area-51 R5 Service Manual

Removing the wireless card

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the stability foot.
2. Remove the left and right side-panels. See
3. If you have multiple graphics cards installed, remove the graphics card. See

Procedure

1. Lay the chassis on the right side.
2. Locate the wireless card on the system board.
3. Remove the screw (M2x3) that secures the wireless card to the chassis.
4. Slide and remove the wireless card from the wireless-card slot.
5. Disconnect the antenna cables from the wireless card.
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
"Removing multiple graphics
After working
www.dell.com/
cards".
57