Replacing Multiple Graphics Cards; Procedure To Replace Three Graphics Card - Dell Alienware Area-51 R5 Service Manual

Replacing multiple graphics cards

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure to replace three graphics card

1. Align the graphics card with the PCI-Express card connector on the system board.
2. Place the card in the connector and press down firmly. Ensure that the card is firmly seated.
3. Press and hold the securing tab on the clamp.
4. Push the clamp back towards the bracket.
5. Rotate the PCIE door to close.
6. Connect the power cables to the graphics card.
NOTE: The location of the power supply connector (VGA1, VGA2, and VGA3) varies depending on the video card
installed.
computer. After working inside your computer, follow the instructions in After working
www.dell.com/
53