System Setup Options - Dell Alienware Area-51 R5 Service Manual

NOTE: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch
for it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and the
operating system logo appears, continue to wait until you see the desktop. Then, turn off your computer and try again.

System setup options

NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 3. System setup options—Main menu
Main
System Date
System Time
BIOS Information
BIOS Version
Build Date
Product Information
Product Name
Set Service Tag
Asset Tag
ME Information
ME Firmware version
EC Information
EC Firmware Version
Memory Information
Total Memory
Memory Available
Memory Technology
Memory Speed
CPU Information
Processor Type
Processor ID
CPU Speed
Cache L2
Cache L3
Device Information
First HDD
PCIe SSD-1
Table 4. System setup options—Advanced menu
Advanced
Advanced BIOS Features
BIOS Recovery via Hard Drive
Displays the current date in mm/dd/yyyy format.
Displays the current time in hh:mm:ss format.
Displays the BIOS version number.
Displays the BIOS release date.
Displays the product name. Default: Alienware Area-51 R5.
Allows you to enter the service tag of your computer.
Displays the asset tag of your computer.
Displays the Management Engine firmware version.
Displays the Embedded Controller firmware version.
Displays the total computer memory installed.
Displays the amount of memory available on the computer.
Displays the type of memory technology used.
Displays the memory speed.
Displays the processor type
Displays the processor identification code.
Displays the CPU speed.
Displays the processor L2 cache size.
Displays the processor L3 cache size.
Displays the first HDD device information.
Displays the PCIe SSD device information.
Allows you to store the recovery image file on the primary hard
drive. Default: Enabled.
113