Super X11SCL-F User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver
(1)
Tools Needed
USB2/3
JBT1
USB4/5
JTPM1
I-SATA0
I-SATA1
I-SATA2
I-SATA3
Location of Mounting Holes
Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precaution-
ary measures to avoid damaging these components when installing the motherboard
to the chassis.
Phillips Screws
VGA
ASpeed
AST2500
LEDBMC
X11SCL-F
REV:1.01
DESIGNED IN USA
MH11
SP1
MH10
BT1
Intel
C242
JF1
M.2 PCI-E 3.0 X4
I-SGPIO1
LE3
LEDPWR
JSD1
JSD2
(7)
LAN2
LAN1
IPMI_LAN
USB0/1
Intel
i210
CPU
MEGERAC
LICENSE
MAC CODE
BAR CODE
JSTBY1
22
Standoffs (7)
Only if Needed
COM1