Supermicro X11SCL-F User Manual page 50

Super X11SCL-F User's Manual
SATA Ports
The X11SCL-F has six SATA 3.0 ports (I-SATA0 ~ I-SATA5) supported by the Intel C242
chipset. These SATA ports support RAID 0, 1, 5, and 10. SATA ports provide serial-link signal
connections, which are faster than the connections of Parallel ATA.
Note: Supermicro SuperDOMs are yellow SATADOM connectors with power pins built
in and do not require separate external power cables. These connectors are backwards
compatible with non-Supermicro SATADOMS that require an external power supply.
Disk-On-Module Power Connector
Two power connectors for SATA DOM (Disk-On-Module) devices are located at JSD1 and
JSD2. Connect appropriate cables here to provide power support for your Serial Link DOM
devices.
ASpeed
AST2500
LEDBMC
MH11
SP1
MH10
BT1
USB2/3
JBT1
USB4/5
Intel
C242
5 6
1 M.2 PCI-E 3.0 X4
JTPM1
2
I-SGPIO1
I-SATA0
LE3
I-SATA1
3
I-SATA2
JSD1
I-SATA3
JSD2
4
7 8
DOM Power
Pin Definitions
Pin#
1
2
3
VGA
LAN2 LAN1
Intel
i210
X11SCL-F
REV:1.01
DESIGNED IN USA
CPU
MEGERAC
LICENSE
JF1
LEDPWR
JSTBY1
Definition
5V
GND
GND
1. I-SATA0
COM1
2. I-SATA1
IPMI_LAN
USB0/1 3. I-SATA2
4. I-SATA3
5. I-SATA4
6. I-SATA5
7. JSD1 (DOM PWR)
8. JSD2 (DOM PWR)
MAC CODE
BAR CODE
50