Supermicro X11SCL-F User Manual page 52

Super X11SCL-F User's Manual
ME Manufacturing Mode
Close pins 2-3 of jumper JPME2 to bypass SPI flash security and force the system to operate
in the manufacturing mode, which will allow the user to flash the system firmware from a
host server for system setting modifications. Refer to the table below for jumper settings.
The default setting is Normal.
Watchdog Timer
Watchdog (JWD1) is a system monitor that can reboot the system when a software application
hangs. Close pins 1-2 to reset the system if an application hangs. Close pins 2-3 to generate
a non-maskable interrupt (NMI) signal for the application that hangs. Refer to the table below
for jumper settings. The Watchdog must also be enabled in the BIOS.
ASpeed
AST2500
LEDBMC
2
MH11
1
SP1
MH10
BT1
USB2/3
JBT1
USB4/5
Intel
C242
M.2 PCI-E 3.0 X4
JTPM1
I-SGPIO1
I-SATA0
LE3
I-SATA1
I-SATA2
JSD1
I-SATA3
JSD2
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 Manufacturing Mode
Watchdog
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
Open
VGA
LAN2 LAN1
Intel
i210
X11SCL-F
REV:1.01
DESIGNED IN USA
CPU
MEGERAC
LICENSE
JF1
LEDPWR
JSTBY1
Definition
Reset
NMI
Disabled
1. ME Manufacturing Mode
COM1
2. Watchdog Timer
IPMI_LAN
USB0/1
MAC CODE
BAR CODE
52