Supermicro X11SCL-F User Manual page 15

Peripheral Devices
•
Two (2) USB 2.0 ports on the back I/O panel (USB0/1)
•
Two (2) USB 3.1 Gen 1 ports on the back I/O panel (USB6/7)
•
Two (2) front accessible USB 2.0 headers with two (2) USB connections each (USB2/3, USB4/5)
•
One (1) front accessible USB 3.1 Gen 1 header with two (2) USB connections (USB8/9)
•
One (1) USB 3.1 Gen 1 Type-A header (USB10)
BIOS
•
256Mb AMI BIOS SPI Flash BIOS
®
•
ACPI 6.0 or later, Plug and Play (PnP), BIOS rescue hot-key, SPI dual/quad speed support, riser card auto detection
support, SMBIOS 2.7 or later
Power Management
•
ACPI power management
•
Power button override mechanism
•
Wake-on-LAN
•
Power-on mode for AC power recovery
•
Power supply monitoring
System Health Monitoring
•
Onboard voltage monitoring for +12V, +5V, +3.3V, CPU, Memory, VBAT, +5V stdby, +3.3V stdby, +1.8V PCH, +1.05V
PCH, +1.0V PCH, CPU temperature, VRM temperature, PCH temperature, system temperature, and memory temperature
•
4 CPU switch phase voltage regulator
•
CPU thermal trip support
•
Platform Environment Control Interface (PECI)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zones
•
Multi-fan speed control support through onboard BMC
•
Five (5) 4-pin fan headers
System Management
•
Trusted Platform Module (TPM) support
•
SuperDoctor® 5
•
Watchdog, Non-maskable Interrupt (NMI), RoHs
•
Chassis intrusion header and detection
•
Server Platform Service
LED Indicators
•
CPU/system overheat LED
•
Power/suspend-state indicator LED
•
Fan failed LED
•
UID/remote UID
•
HDD activity LED
•
LAN activity LED
Notes: The table above is continued on the next page.
Motherboard Features
15
Chapter 1: Introduction