Remove Jam From The First Transport Path - Nautilus Hyosung MONiMAX7600DA Operator's Manual

Operator Manual

Remove jam from the First Transport Path

▶ Zone ②, Inside the SCM or Bundle Section.
1. If there is a jam on the first transport path, push the lock lever in the arrow direction
as shown in the picture and open the First Transport Path.
2. Remove a jammed bill or foreign substances.
3. After checking if the jammed bill is removed, completely close the First Transport
Path pushing the lock lever in the yellow arrow direction as shown in the picture.
Opening SCM to remove jam.
Closing SCM after removing jam.
© Nautilus Hyosung, Inc. All Rights Reserved.
Chapter4. Cash & Check Insert Module (CCIM)
4-9