Table of Contents
Advertisement
Operator Manual
Chapter6. Receipt Printer
Overview
► The Receipt Printer is located on the right side when opening the rear panel, and can
Basic Specifications
► Basic specifications of receipt printer are summarized as follows.
be divided into 3 assemblies, Body Assembly, TPH (Thermal Printing Head) Assembly,
Outlet Assembly.
The Body Assembly contains the hopper for the paper roller and the controller board.
Next to the hopper is a sensor that detects the paper low status and issues a warning.
This Body Assembly has a mechanism that reduces the stress coming from the paper
roll and maintains paper tension. Also, if an attendant inserts the paper into machine, it
automatically sets the paper and performs an advance paper and cut.
TPH (Thermal Printing Head) Assembly is a printing engine equipped with a thermal
printing head and a cutter. It prints out what has been commanded by the Host, cuts
the printed output and sends it to the Outlet Assembly.
Outlet Assembly has a long transport section which enables landscape printing. It is
also easy to maintain or repair in case of receipt jams because of its open structure.
Item
Printing Type
Maximum Print Length
No. of Print Lines
Valid Printing Width
Type of Printer Letter
Paper
Type
© Nautilus Hyosung, Inc. All Rights Reserved.
Specifications
THERMAL LINE Printing
Type
60 Print/line (based on
Alpha Numeric value)
Max. 21lines/print (based
on 1print=167mm
(6.57inch) )
Max. 158mm (6.22inch)
Chinese,
English/Numbers
(Alphanumeric), Latin,
Japanese, Korean,
Arabic, Russian, Greek,
Hebrew, Coptic
Inside Printing Thermal
Chapter6. Receipt Printer
Note
(8dots/mm)
6-1
Advertisement
Table of Contents
