How To Empty The Reject/Retract Box - Nautilus Hyosung MONiMAX7600DA Operator's Manual

Hide thumbs Also See for MONiMAX7600DA:
Table of Contents

Advertisement

Chapter5. Cash Dispenser

How to Empty the Reject/Retract Box

▶ Reject & Retract Box is an integral system that transfers defective bills from cash
Reject Bills Area
5-10
cassette to Reject Compartment while sending the bills withdrawn but not taken by
customers to the Retract Compartment where the bills can be safely stored.
All bills in the retract area of the box can be reused and bills found in the reject area
may not be reused. Any bills rejected will be rejected again and it may cause a major
bill jam taking the CDU down.
<Note!>
After all jams have been removed it is imperative that you test the complete unit via
diagnostics.
1. Push the lever (A) and holding a Reject/Retract Box handle (B) with the other hand
pull out slightly, and support the Reject/Retract Box from bottom with the hand
pushed the lever (A), and pull out to the end of the cassette.
© Nautilus Hyosung, Inc. All Rights Reserved.
Operator Manual
Retract Bills Area

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx7600da

Table of Contents