Table of Contents
Advertisement
Starting up
Important
First set up your PaperJet 55E/65E as
shown in the main user guide.
There are two ways to install your PaperJet as
your PC printer.
1
Plug and play start up – your PC
automatically detects your PaperJet and
starts software installation. It requires you
to switch off your PC before connection.
Or
Standard start up – you tell your PC to
2
begin software installation manually.
1
Set up
Follow the PaperJet 55E/65E 'Setting up'
instruction in the main guide.
2
Switch off your PC
4
3
Connect the cable
Connect your PaperJet 55E/65E to your PC's
parallel port using the printer cable (not
supplied).
4
Switch on your PC
5
Connect the fax machine
to the power supply
5
6
Insert the CD
Insert the CD
Insert the PaperJet 55E/65E Software CD in
the CD-ROM drive and close the door.
The "LinkFax" installation procedure starts
automatically.
Advertisement
Table of Contents
