Introduction; System Requirements; Print Cartridges; Please Note - BT PaperJet 65e Printing Manual

Introduction

System requirements

Your PaperJet 55E/65E printer is compatible with
PCs using Windows 95, 98, Me, 2000 and NT.
Recommended configuration
• For Windows 95, Windows 98 first edition
and Windows ME:
Pentium 166 MHz, 32 MB of RAM
• For Windows 98, second edition, Windows
NT and Windows 2000:
Pentium 166 MHz, 64 MB of RAM
• For Windows XP:
Pentium 300 MHz, 128 MB of RAM
All configuration must have at least a CD
reader, a VGA monitor (24-bit board for colour
video) and IEEE 1284 Nibble Mode parallel
interface connection.

Print cartridges

Please note

Your PaperJet 55E/65E uses a black or
colour ink cartridge. Only one cartridge can
be installed at a time.
Faxes you receive will only be printed when
the black ink cartridge is installed.
Faxes will be stored in the memory if the
colour cartridge is installed.
If the memory becomes full, your machine
will not receive any more until you have
printed some of the faxes, so it is good
practice to keep the black ink cartridge
in the machine for all normal use.
2
Handling the ink cartridges
Avoid touching the nozzles and metal
electrical contacts.
Never try to refill the print cartridge, as this
could damage the print head and your
PaperJet 55E/65E.
To swap over the ink cartridges
Lift the top cover.
Pull green tab towards front of machine to
release cartridge.